Rapid TMC laser prototyping: Compositional and phase-structural sustainability via combinatorial design of titanium-based gradient alloy reinforced by nano-sized TiC or TiB2 ceramics

Igor Shishkovsky, Nina Kakovkina, Vladimir Scherbakov

Результат исследований: Глава в книге, отчете, сборнике статейМатериалы для конференциирецензирование

1 Цитирования (Scopus)

Аннотация

In this study, we developed an innovative approach to achieving a higher sustainability in the experimentally guided combinatorial design of metal-matrix gradient structural composites. The titanium carbide of nano sizes or titanium diboride of submicron sizes were incorporated into the titanium matrix during the selective laser melting (SLM) process of Ti+(10, 15, 20 wt.%) TiC/TiB2 powder mixtures. Optimal regimes of 3D laser powder bed process were determined. We compared how the interfacial properties would change due to the composition differences in case of TiC and TiB2 reinforcing titanium matrix composites (TMC). Phase analysis of the fabricated TMC showed that the initial TiC and TiB2 particles dissolved with different velocities after remelting. Special attention was paid to carbon and boron dilution and secondary carbides and borides phase formation mechanisms when TiC/TiB2 were mixed with titanium. Microstructure, phase constitution and mechanical properties of the TMCs were investigated by the OM, SEM, XRD and microhardness measurement in order to validate the rapid alloy prototyping (RAP) concept in single technological approach.

Язык оригиналаАнглийский
Название основной публикацииLaser 3D Manufacturing V
РедакторыHenry Helvajian, Alberto Pique, Bo Gu
ИздательSPIE
ISBN (электронное издание)9781510615311
DOI
СостояниеОпубликовано - 2018
Опубликовано для внешнего пользованияДа
Событие5th Meeting of Laser 3D Manufacturing - San Francisco, Соединенные Штаты Америки
Продолжительность: 29 янв. 20181 февр. 2018

Серия публикаций

НазваниеProceedings of SPIE - The International Society for Optical Engineering
Том10523
ISSN (печатное издание)0277-786X
ISSN (электронное издание)1996-756X

Конференция

Конференция5th Meeting of Laser 3D Manufacturing
Страна/TерриторияСоединенные Штаты Америки
ГородSan Francisco
Период29/01/181/02/18

Fingerprint

Подробные сведения о темах исследования «Rapid TMC laser prototyping: Compositional and phase-structural sustainability via combinatorial design of titanium-based gradient alloy reinforced by nano-sized TiC or TiB2 ceramics». Вместе они формируют уникальный семантический отпечаток (fingerprint).

Цитировать