4D manufacturing of intermetallic SMA fabricated by SLM process

Igor Shishkovsky, Vladimir Scherbakov

Результат исследований: Глава в книге, отчете, сборнике статейМатериалы для конференциирецензирование

5 Цитирования (Scopus)

Аннотация

In the present report, we demonstrate how Selective laser melting (SLM) process can contribute to a 4D manufacturing of functional and structural properties of shape memory alloys (SMAs) in-situ synthesized into Ni-Ti and Cu-Al-Ni powdered systems. Correlations of specific resistance and phase structure in Ni-Ti and Cu-Al-Ni intermetallic phases after the SLM were experimentally observed. It was shown that electrical resistivity of the phases studied (austenite, rhombohedral and martensite phases) increases with temperature but the slopes are quite different. Intermediate R-phase in nitinol (NiTi-intermetallide) shows generally higher electrical resistivity than the austenite phase, but its value grows with the decrease of temperature for laser melted samples. We explained this fact by an accumulation of dislocation with the continuous increase of the R-phase with the decrease of temperature. Hysteresis loop of the electrical resistivity and phase-structural properties of SL-Melted samples are correlated with conditions of SLM process, additional heating during the layerwise process, 3D part's porosity. It will be important for perspective 4D printed biomedical applications (bio-MEMS-sensors, drug delivery systems, implants, etc.) of fabricated self-self-initiating and self-fixing SMAs.

Язык оригиналаАнглийский
Название основной публикацииLaser 3D Manufacturing V
РедакторыHenry Helvajian, Alberto Pique, Bo Gu
ИздательSPIE
ISBN (электронное издание)9781510615311
DOI
СостояниеОпубликовано - 2018
Опубликовано для внешнего пользованияДа
Событие5th Meeting of Laser 3D Manufacturing - San Francisco, Соединенные Штаты Америки
Продолжительность: 29 янв. 20181 февр. 2018

Серия публикаций

НазваниеProceedings of SPIE - The International Society for Optical Engineering
Том10523
ISSN (печатное издание)0277-786X
ISSN (электронное издание)1996-756X

Конференция

Конференция5th Meeting of Laser 3D Manufacturing
Страна/TерриторияСоединенные Штаты Америки
ГородSan Francisco
Период29/01/181/02/18

Fingerprint

Подробные сведения о темах исследования «4D manufacturing of intermetallic SMA fabricated by SLM process». Вместе они формируют уникальный семантический отпечаток (fingerprint).

Цитировать