Localization of Deformation in Lattice Structures of 3D-Printed Samples of 03X17H14M2 Steel

D. G. Firsov, S. D. Konev, O. N. Dubinin, S. A. Evlashin, I. V. Shishkovsky

Research output: Contribution to journalArticlepeer-review

Abstract

Abstract: The deformation behavior of 3D 03X17H14M2 steel samples with various lattice structures created by selective laser melting has been studied under compression conditions using the digital image correlation method. Spatially temporal patterns of localization of transverse (εxx) and longitudinal (εyy) deformations of topological structure actual types have been studied. It has been found that it is possible to achieve a relative density of 20% for 3D printed products with lattice G-structures and cell sizes of 1.5 and 3 mm. However, all lattice 3D samples lose their plasticity, the Young’s modulus decreases by more than an order of magnitude, and the Poisson’s ratio increases by 1.3–2 times compared to the corresponding parameters for solid 3D samples.

Original languageEnglish
Pages (from-to)683-686
Number of pages4
JournalTechnical Physics Letters
Volume46
Issue number7
DOIs
Publication statusPublished - 1 Jul 2020

Keywords

  • deformation localization
  • digital image correlation method
  • lattice structures
  • selective laser melting
  • topological optimization

Fingerprint

Dive into the research topics of 'Localization of Deformation in Lattice Structures of 3D-Printed Samples of 03X17H14M2 Steel'. Together they form a unique fingerprint.

Cite this