Dual time stepping algorithms with the high order harmonic balance method for contact interfaces with fretting-wear

Loc Salles, Laurent Blanc, Fabrice Thouverez, Alexander M. Gouskov, Pierrick Jean

Research output: Contribution to journalArticlepeer-review

22 Citations (Scopus)

Abstract

Contact interfaces with dry friction are frequently used in turbomachinery. Dry friction damping produced by the sliding surfaces of these interfaces reduces the amplitude of bladed-disk vibration. The relative displacements at these interfaces lead to fretting-wear which reduces the average life expectancy of the structure. Frequency response functions are calculated numerically by using the multi-harmonic balance method (mHBM). The dynamic Lagrangian frequency-time method is used to calculate contact forces in the frequency domain. A new strategy for solving nonlinear systems based on dual time stepping is applied. This method is faster than using Newton solvers. It was used successfully for solving Nonlinear CFD equations in the frequency domain. This new approach allows identifying the steady state of worn systems by integrating wear rate equations a on dual time scale. The dual time equations are integrated by an implicit scheme. Of the different orders tested, the first order scheme provided the best results.

Original languageEnglish
Article number032503
JournalJournal of Engineering for Gas Turbines and Power
Volume134
Issue number3
DOIs
Publication statusPublished - 2012
Externally publishedYes

Fingerprint

Dive into the research topics of 'Dual time stepping algorithms with the high order harmonic balance method for contact interfaces with fretting-wear'. Together they form a unique fingerprint.

Cite this